HS code alignment with sustainability targets

List of contents of this article:

• 1,HS code alignment with sustainability targets What are the installation requirements of the security monitoring system
• 2, Wireless Home Monitoring Installation Tutorial
• 3, Monitoring installation steps
• 4, Monitoring equipment installation tutorial

AnWhat are the installation requirements for the anti-monitoring system?

Install the camera: Install the camera in the selected position as needed. Make sure that the camera can provide clear images and a wide field of view. Connect the camera and monitor: Use the correct type of cable to connect the camera to the monitor. Make sure the connection is stable and test whether the image transmission is normal.

Installation angle: mainly divided into two types: cylinder type and hemispherical type. Among them, the cylinder type is relatively common and can be used indoors and outdoors; the hemispherical type is generally used indoors, with a small volume and can be installed on the wall or ceiling.

The equipment of the security system is required to be installed in a clean air-conditioned room and installed on the standard rack of 19. Appropriate space should be left between the equipment, and forced ventilation fans should be used.

In the environment of strong electromagnetic interference, the installation of surveillance cameras should be isolated from the ground.Under the condition of meeting the requirements of the field of view of the monitoring target, its installation height: indoors should not be less than 5m from the ground, and outdoors should not be less than 5m from the ground.

Ultra-long-distance monitoring: This kind of monitoring generally adopts GPRS traffic transmission. This method can be used for places where ultra-long-distance transmission and construction wiring are very difficult. Generally, this method can be used for temporary use of cameras at some high-speed intersections. The installation is simple and the signal is stable. After Maintenance and debugging are also easy.

wireless home monitoring installation tutorial

home camera installation steps: steps to determine the installation direction of the surveillance camera, determine the monitoring The position of the back-end device (hard disk recorder and monitor). Then the work wiring began step by step. The step is to install the camera bracket at the place where the surveillance camera is installed.

Determine the installation location: Choose the appropriate installation location according to the characteristics and needs of your home. Generally speaking, doors, stairways, backyards and other places where safety problems are prone to occur are relatively common installation locations. Buy a suitable surveillance camera: choose a surveillance camera suitable for home use.

Choose a suitable wireless surveillance camera: Choose a wireless surveillance camera that suits your needs in the market. Determine the performance parameters of the camera's resolution, field of view angle, night vision function and so on as needed.

The installation method of home camera monitoring can be briefly divided into the following steps: Choose a suitable camera: Choose a camera suitable for home use according to your needs, such as indoor cameras or outdoor cameras.

To install a surveillance camera, you need to choose a suitable surveillance camera according to the following steps. Choose a suitable surveillance camera according to your needs, considering the size of the area that needs to be monitored, the resolution of the camera, the viewing angle, night vision ability and other factors.

Monitoring Installation Steps

Monitoring CameraThe installation method of the image head can be divided into the following steps: Determine the installation location: First of all, determine the installation location of the surveillance camera, and usually choose an important location in the area that needs to be monitored, such as entrance, corridor, parking lot, etc.

Preparation When installing a surveillance camera, you first need to determine the installation location of the camera. Choose the appropriate location according to the need to monitor the area, such as the door, living room, etc. Before installation, you need to prepare tools, such as electric drills, screwdrivers, expansion screws, etc.

Preparation tools: Some tools are needed to install monitoring equipment, such as electric drills, screwdrivers, wrenches, etc. You need to prepare these tools before installation. Installation steps Install the camera (1) Determine the position of the camera: Determine the location of the camera according to the needs of the monitoring area.

Detailed steps for installing the camera: prepare to install the camera supporting parts, pliers, screwdrivers, camera, camera 12V1A power supply, hard disk video host, etc. Wire the network cable to the position where the surveillance camera needs to be installed; pick up the camera bracket, install the chassis on the bracket, and install the camera on the bracket.

The installation steps of surveillance cameras are as follows: material preparation: surveillance cameras, routers, etc. Select monitoring equipment. When selecting monitoring equipment, the number and type of surveillance cameras, the storage capacity of the hard disk recorder, etc. should be determined according to actual needs. In addition, you also need to choose the right brand and model according to your budget.

Installing monitoring equipment is one of the important steps in the installation of monitoring systems. When installing monitoring equipment, it is necessary toPay attention to the following aspects: Camera installation location: It is necessary to choose the appropriate location to install the camera to ensure that the monitoring range covers the area that needs to be monitored.

Monitoring device installation tutorial

The detailed tutorial of self-installation monitoring is as follows: material preparation: pliers, screwdrivers, etc. Assemble the camera, install it in the required position, connect the network cable and power cord, and the power supply is 12V DC power supply, which can be powered separately with a centralized power supply. A 220 AC transformer 12v DC adapter is installed at the camera.

At the installation position, dig out the soil, put the pre-buried parts into the ground, and the height is 70mm higher than the ground, and then pour it with cement marked 1:1. When pouring, the heightThe threaded part of the ground part is bandaged with insulating tape, and the monitoring pole can only be installed after 4-5 days.

Step 1: Prepare the required materials and equipment - surveillance camera - computer or surveillance equipment - network connection Step 2: Install the surveillance camera - install the surveillance camera in the appropriate position in the required monitoring area to ensure that the camera has a good field of view.